Standard wired remote controller - RCS-TM80BG
SANYO realise that the best designed energy efficient solutions can be completely let down by misuse due to lack of information or user ignorance. Too often, significant energy is wasted as users alter the temperature on the controller to its lowest setting (18°C) if they are too hot and to the highest temperature (30°C) if they are too cold, rather than allowing a system to condition an area to the set point temperature.
To prevent this massive potential for energy wastage, the SANYO ECOi indoor unit’s operating parameters can be altered or fixed, without cost, by adjusting the standard RCS-TM80BG remote controller. For example, the low point could be changed to 20°C and the high point fixed at 24°C, easily sufficient to provide comfort cooling, but immediately eliminating large temperature swings and the resultant wasteful energy consumption.
Mode change, deadbands and fan speed settings can also be changed to suit the individual application ensuring the desired conditions are maintained with the minimum use of energy.
Wireless remote controller
- Various model references
- 1 group, with a maximum of 8 units
- Up to 2 remote controllers can be connected per group of indoor units
On/off controller
- Up to 16 groups, with a maximum of 64 units
- Up to 8 units (4 main units + 4 sub units) can be connected to one system
- Use without remote controller is possible
Simplified remote controller
- RCS-KR1AG
- 1 group, with a maximum of 8 units
- Up to 2 remote controllers can be connected per group of indoor unit
TouchScreen controller
- SHA-KT256AG
- 64 groups x 4 S-Net circuits with a maximum of 256 units
- Simple, user friendly touch screen operation
Schedule timer
- SHA-TM64AG
- 8 groups, with a maximum of 64 units
- Designed to match standard remote controller
- Power supply from the system controller
- When there is no system controller, connection is possible to the T10 terminal of an indoor unit
LonWorks interface
- SHA-LN16UG
- Communications converter for connecting LonWorks to the SANYO control network
System controller
- SHA-KC64AG
- 64 groups, with a maximum of 64 units
- Use without remote controller is possible
- Up to 5 system controllers can be connected to a single S-Net
AMY software
- Dedicated SANYO software can be loaded onto any Windows driven device
- Indoor usage can be monitored for individual billing
- Full control including time clocking can lead to savings on remote controllers
